Επιτοίχια βάση SMS Smart Media Solutions FS001450AW-P2 αλουμίνιο λευκό 12 kg

The SMS Smart Media Solutions FS001450AW-P2 is a wall mount for short-throw projectors and other media devices. Constructed from aluminium with white plastic fittings, it has a total pillar length of 1450 mm and a maximum load capacity of 12 kg. The design allows the mount to be positioned close to the ceiling on a wall plate while keeping the projector accessible along the full length of the pillar.

Advantages

The aluminium construction provides durability and low weight, while the white plastic fittings give a clean appearance that matches many projectors. The pillar supports suspension of the projector at any point along its length, and the mount allows swivel and tilt adjustments for precise aiming. A choice of black or white slide adapters enables colour matching with the installed projector.

Suitable for

• Short-throw projectors
• Classroom and meeting-room installations
• Home cinema setups where ceiling-adjacent wall mounting is required
• Lightweight media devices up to 12 kg

Key specifications

• Model: SMS FS001450AW-P2
• Mounting type: Wall
• Material: Aluminium with plastic fittings
• Colour: Aluminium, White (with optional black fittings or slides)
• Pillar length (depth): 1450 mm
• Maximum load: 12 kg
• MPN: FS001450AW-P2
• EAN: 8715946421674

How to use

Secure the wall plate near the ceiling to a suitably strong substrate using appropriate fixings for the wall material. Attach the pillar to the wall plate and slide the projector mount to the desired height along the pillar. Fasten the projector to the universal slide adapter in the matching colour, then adjust swivel and tilt to achieve the correct projection angle. Confirm all fastenings are tightened and the installation supports the projector weight before use.

Recommendations

Use appropriate wall anchors and screws rated for the combined weight of the mount and device. Verify the ceiling-adjacent installation allows sufficient ventilation for the projector and access for cable routing. If in doubt, consult a qualified installer.