Διακόπτης βίντεο HDMI ShiverPeaks SP05-02005

The ShiverPeaks SP05-02005 HDMI video switch lets you connect multiple HDMI sources to a single display and supports video modes up to 2160p. Constructed from metal with a black finish, the switch is designed for stable operation and everyday use in home entertainment systems. It draws around 4W of power and operates from a 5V supply, offering a compact and efficient solution to reduce input swapping on TVs or monitors.

Advantages

The metal housing provides increased durability and passive heat dissipation compared with plastic enclosures. Support for up to 2160p video modes ensures compatibility with 4K content and modern HDMI sources. Low typical power consumption and a 5V operating voltage make the unit suitable for most residential power setups and low-energy applications. The straightforward design simplifies setup and minimizes visible cabling when installed near a display.

Suitable for

• Connecting multiple gaming consoles to a single TV or monitor
• Switching among streaming devices and set-top boxes without cable swapping
• Home theaters and living room AV setups where a single HDMI input is limited
• Office or meeting-room displays that need several HDMI inputs

Key specifications

• Video resolution support: up to 2160p (4K)
• Construction: metal housing with black finish
• Typical power consumption: approximately 4 W
• Operating voltage: 5 V
• Function: HDMI input switching to a single HDMI output

How to use

Connect each HDMI source to an available input on the switch and run an HDMI cable from the switch output to your display. Power the unit using a compatible 5V supply. After connection, select the required source using the switch controls on the device or any provided selector method; the connected display will receive the chosen source's video signal. Ensure connected cables and the display support the desired resolution for correct image output.

Recommendations

For best performance, use high-quality HDMI cables rated for 4K video and verify that the display and source devices are configured for the intended resolution and refresh rate. Place the switch where ventilation is available and avoid covering the metal housing to maintain passive cooling.