DeLOCK αντάπτορας USB 2.0 σε σειριακό RS-232 50 cm FTDI μαύρο

The DeLOCK USB 2.0 to serial RS-232 adapter with a 50 cm cable provides a compact and reliable interface to connect RS-232 devices to a computer via a USB Type-A port. Designed for meters, POS systems, printers, modems and various IoT devices, this adapter uses an FTDI-based solution to ensure compatibility and stable data transfer while occupying minimal space.

Advantages

The adapter combines a standard USB 2.0 Type-A connector with an RS-232 port in a compact housing (39.0 x 33.0 x 14.7 mm for the RS-232 plug) and a 0.5 m cable, offering convenient handling and straightforward connection to serial equipment. Its FTDI chipset provides broad driver support across common operating systems and helps maintain dependable communication with legacy and industrial devices.

Suitable for

• Connecting meters and measurement instruments to a PC
• Point-of-sale (POS) systems and receipt printers
• Modems and legacy serial peripherals
• IoT devices and industrial controllers with RS-232 interfaces

Key specifications

• Connector 1: USB Type-A (USB 2.0)
• Connector 2: RS-232
• Cable length: 0.5 m
• Product colour: Black
• Product dimensions (RS-232 plug): 39.0 x 33.0 x 14.7 mm
• Manufacturer chipset: FTDI (driver support)

How to use

Plug the USB Type-A connector into an available USB 2.0 port on your computer. Connect the RS-232 plug to the serial device–for example, a printer, modem or meter. Install the FTDI driver supplied by the operating system or from the manufacturer's website if the system does not automatically recognise the adapter. After driver installation, configure the serial port parameters (baud rate, parity, data bits, stop bits) in your application to match the connected device.

Recommendations

For reliable operation, use a USB 2.0 or higher host port and verify driver installation before critical tasks. Keep cable runs short where possible and avoid placing the adapter near strong electromagnetic sources. Match serial communication settings exactly to the connected device to prevent data errors.