ACT πράσινο 1,5 m LSZH S/FTP CAT6A καλώδιο patch, χωρίς γλωττίδα, με βύσματα RJ45

The ACT FB7751 is a 1.5 m Cat6a S/FTP networking cable with full copper AWG#26 conductors and 50µ gold-plated RJ-45 contacts. It is designed for high-speed data transfer and reliable signal integrity, featuring S/FTP shielding and factory-tested construction. The cable’s green jacket provides a distinctive appearance for organized installations.

Advantages

The cable uses full copper AWG#26 wires and 50µ gold RJ-45 contacts to ensure good conductivity and corrosion resistance. S/FTP shielding reduces electromagnetic interference and crosstalk, while independent certification confirms compliance with ACT specifications. Each cable is 100% tested to verify performance and reliability.

Suitable for

• Gigabit and 10 Gigabit Ethernet connections
• Data centers and server racks
• Office network patching and wall-to-wall runs up to short channel lengths
• Home networks requiring high-speed wired connections

Key specifications

• Standard: Cat6a
• Length: 1.5 m
• Conductor: full copper AWG#26
• Shielding: S/FTP (shielded foil with foil-wrapped pairs and overall braid)
• Contacts: RJ-45 with 50µ gold plating
• Colour: Green
• Testing: 100% tested; ACT specifications verified by independent certification institute

How to use

Connect one RJ-45 connector to your network device (switch, router, or NIC) and the other to the corresponding port on the second device. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and keep it separated from power cables to minimise interference. For best performance, use within the specified length and proper channel configurations.

Recommendations

Use this Cat6a S/FTP cable for high-speed wired links where reduced interference and tested reliability are required. Avoid excessive bending, pulling, or crushing; store and install at moderate temperatures and away from sources of strong electromagnetic noise.