ACT Pink 1,5 m LSZH U/FTP CAT6A Datacenter-Slimline-Patchkabel snagless με βύσματα RJ45

The ACT Pink 1.5m LSZH U/FTP CAT6A patch cable with snagless RJ45 connectors is a slimline datacenter Ethernet cable designed for high-speed data transmission. With a 1.5 m length, gold-plated contacts and LSZH jacket, it provides reduced smoke and halogen-free properties for safe indoor use. The slim 3.8 mm diameter and improved bending radius reduce cable bulk and help maintain better airflow in server racks and network cabinets compared with standard CAT6A patch cords.

Advantages

The U/FTP construction and CAT6A specification support high-frequency performance required in datacenter environments while the slimline design lowers diameter and bending radius to save space and improve airflow. The snagless RJ45 boots protect the connector latch during installation, and gold-plated contacts ensure reliable signal transfer. The LSZH jacket minimizes smoke and halogen release in case of fire.

Suitable for

• Patch connections in datacenters and server rooms
• High-density network cabinets and racks where space and airflow matter
• Device-to-device connections requiring CAT6A performance (1.5 m runs)
• Indoor installations that require low-smoke, halogen-free cabling

Key specifications

• Standard: CAT6A
• Construction: U/FTP (shielded pairs)
• Diameter: slimline approx. 3.8 mm
• Length: 1.5 m
• Connectors: RJ45 – snagless
• Contacts: gold-plated
• Jacket: LSZH (low smoke zero halogen)
• Color: Pink

How to use

Connect one RJ45 end to a network device (switch, patch panel or NIC) and the other to the corresponding port. Ensure both connectors latch fully. Route the cable through cable management or horizontal managers in the rack to maintain the recommended bending radius and to preserve airflow. Avoid sharp bends and tight kinks; do not exceed manufacturer-recommended bend limits.

Recommendations

ACT recommends using a maximum bundle size of 24 slimline CAT6A cables for PoE deployments to limit temperature rise; higher bundle counts may increase attenuation and temperature, particularly with very thin conductors such as 32 AWG. Follow relevant ISO/IEC and TIA guidelines for connector and cable selection; note that thinner gauges increase attenuation at higher frequencies.