ACT μαύρο 1,5 μέτρα U/UTP CAT6A καλώδιο patch με βύσματα RJ45

ACT patch cables use full copper conductors and meet the ANSI/TIA568-C2-1 performance requirements. The Black 1.5 m U/UTP CAT6A patch cable is equipped with high-quality RJ45 connectors plated with gold for reliable signal transmission and supports data rates up to 10 Gbps, making it suitable for home and office networking. Compatible with CPR Euroclass: Eca.

Advantages

The cable’s full copper conductors ensure optimal electrical conductivity and compatibility with Power over Ethernet (PoE) applications. Compliance with international standards and ANSI/TIA568-C2-1 guarantees predictable performance and long-term stability when used with structured copper networks and reliable active devices. Gold-plated RJ45 connectors improve contact reliability and reduce signal loss.

Suitable for

• Connecting PCs, switches and routers in home networks
• Office local area network (LAN) patching
• PoE devices such as IP phones, access points and cameras
• High-speed 10 Gbps links over short to medium distances

Key specifications

• Length: 1.5 m
• Category: CAT6A
• Cabling type: U/UTP
• Connectors: RJ-45 to RJ-45, gold-plated
• Data rate: up to 10 Gbps
• Colour: Black
• Compliance: ANSI/TIA568-C2-1; CPR Euroclass: Eca

How to use

Plug one RJ45 connector into the network port of your device and the other into a switch, router or patch panel. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and mechanical stress; keep it away from high-voltage power lines to minimize interference. For PoE usage confirm that both the switch and the powered device support the required PoE standard and power budget.

Recommendations

For best performance, use the ACT CAT6A patch cable within structured cabling limits, avoid running it parallel to mains power for long distances, and replace cables that show physical damage or degraded connector contacts.