ACT DD7901 καλώδιο δικτύου μαύρο 1 m Cat6a U/UTP (UTP)

ACT DD7901 is a Cat6a U/UTP slimline networking patch cable with a 1 m length and black LSZH jacket. The cable uses full copper 28AWG conductors and 50 µin gold-plated RJ45 contacts, and conforms to the ANSI/TIA-568.2-D standard. Its reduced outer diameter improves airflow in server racks and network cabinets while the 90° angled down to 90° angled up RJ45 connectors make it suitable for tight spaces behind equipment.

Advantages

The slimline 3.6 mm outer diameter and smaller bend radius allow denser cable routing and better cabinet ventilation compared with standard Cat6a patch cords. The LSZH jacket limits hazardous smoke and halogen release in case of fire. Full copper 28AWG conductors and gold-plated contacts provide reliable electrical contact and signal integrity for high-speed Ethernet links.

Suitable for

When it may not be suitable

This 1 m slimline Cat6a patch cable is not intended for long-distance runs; use standard-length or bulk cable for links exceeding typical patch lengths. If a straight or differently angled connector orientation is required, choose a variant with straight, 90° left, or 90° right connectors instead.

Key specifications

How to use

Route the cable through the rack or cabinet, taking advantage of the slim 3.6 mm diameter to maintain airflow and reduce bundle bulk. Plug the angled RJ45 connectors into the device and patch-panel or switch ports so that the cable exits in the desired direction without forcing tight bends. Ensure connectors are fully seated to establish reliable contact.

What to consider before purchase

Recommendations

Use this slimline Cat6a patch cable for short, high-density connections in racks and cabinets; avoid forcing bends tighter than the cable’s recommended radius and select the connector orientation that matches your equipment layout.