Υλικό 3D εκτύπωσης Creality 3D 3301010306 πολυγαλακτικό οξύ PLA μαύρο 1 kg 1,75 mm

Creality 3D 3301010306 Polylactic acid (PLA) Black 1 kg 1.75 mm is a general-purpose 3D printing filament supplied on a 1 kg spool. Manufactured to work with Creality 3D printers and other FDM machines that accept 1.75 mm filament, this black PLA is formulated for reliable extrusion, consistent diameter, and predictable layer adhesion. PLA is a bio-based thermoplastic that prints at relatively low temperatures, produces minimal warping, and is suitable for detailed models, prototypes, and household items.

Advantages

This black PLA filament provides good dimensional stability and surface finish for visible parts. Its lower printing temperature compared with some other materials reduces stringing and curling issues on many desktop FDM printers. The 1.75 mm diameter and factory-wound spool help ensure smooth feeding and fewer nozzle clogs when storage and printing guidelines are followed. PLA’s composition also makes it easier to sand, paint, and post-process for functional prototypes and decorative pieces.

Suitable for

• Prototyping and concept models
• Decorative prints and figurines
• Educational projects and classroom use
• Low-stress functional parts and enclosures

Key specifications

• Material: Polylactic acid (PLA)
• Color: Black
• Net weight: 1 kg spool
• Filament diameter: 1.75 mm (nominal)
• Compatibility: FDM/FFF 3D printers accepting 1.75 mm filament

How to use

Load the 1.75 mm PLA filament into the printer’s feeder according to the printer manufacturer’s instructions. Typical print settings for PLA include a hotend temperature in the range recommended by the printer or material guidelines and a heated bed set to a low temperature or left unheated depending on adhesion method. Print at moderate speeds and use appropriate retraction settings to minimize stringing. After printing, allow the part to cool before removal to reduce warping and improve dimensional accuracy.

Recommendations

Store the filament in a dry, cool place and keep it sealed when not in use to prevent moisture absorption. If moisture is suspected, dry the filament following accepted filament-drying practices before printing. Adjust print temperature, bed adhesion method, and cooling to match your printer and model complexity for best results.