Creality TPU Filament (μαύρο) 1,75 mm 1 kg

Creality CR-TPU filament is a high-quality, highly flexible thermoplastic polyurethane that combines exceptional resilience with durability. Thanks to its soft structure and high adhesion, it is ideal for printing parts that require flexibility and resistance to deformation — such as cases, gaskets, handles or soles. The material is compatible with most FDM printers, including all Creality models.

Advantages

High flexibility and durability: CR-TPU is distinguished by its excellent elasticity, which allows it to return to its original shape after bending, stretching or impact. The material is resistant to cracking, abrasion and wear, allowing the models to retain their properties even after long use. Soft and snug-fitting material: The optimized TPU formula provides high adhesion and a soft texture, which increases adhesion between layers and ensures smooth, even surfaces. It's an ideal choice for models where flexibility and resistance to wear and tear are important, such as handles, cases and cushioning protective parts. Chemical and environmental resistance: CR-TPU exhibits high resistance to water, oils and solvents, making prints durable and not susceptible to chemical agents. The material does not absorb moisture, does not degrade under UV light and retains its properties over a wide temperature range. This means that it will perform well both indoors and outdoors, maintaining color and flexibility for a long time.

Suitable for

• Flexible parts such as gaskets, seals, and bumpers
• Protective cases and covers
• Handles and grips
• Soles and cushioning components
• Wearable items and accessories

Key specifications

• Material: Thermoplastic Polyurethane (TPU)
• Colour: Black
• Filament Diameter: 1.75 mm
• Diameter Tolerance: ±0.02 mm
• Net Filament Weight: 1 kg
• Print Temperature: 200-220 °C
• Heated Bed Temperature: 50-60 °C (or Off)
• Printing Speed: 20-40 mm/s
• Shore Hardness: 95A
• Density: 1.25 g/cm³
• Tensile Strength: 30 MPa
• Elongation at Break: 500%
• Flexibility: High
• Layer Adhesion: Excellent
• Compatibility: FDM 3D Printers
• Spool Material: ABS/PC
• Spool Hole Diameter: 56 mm
• Vacuum Sealed: Yes, with desiccant
• Bubble-Free: Yes
• Tangle-Free: Yes

Recommendations

For best results, use a direct drive extruder and print at lower speeds (20-40 mm/s). Ensure the filament is stored in a dry environment and use the included desiccant to maintain optimal printing quality.