Yikong YK41011 Crawler 1/10 RTR Yellow

The Yikong YK41011 is a rugged 1/10 scale 4WD RTR crawler styled after the legendary LC79 pickup. Built on a low-center-of-gravity tub chassis, it features metal portal axles for 65 mm of ground clearance, manually lockable front and rear differentials, and a switchable 2-speed transmission. The pre-assembled model comes equipped with a 550 brushed motor, a waterproof Hobbywing 60 A ESC, and a strong 25 kg metal-gear steering servo. A 2.4 GHz 4-channel remote control is included, requiring only a drive battery, charger, and transmitter batteries to hit the trails. It is intended for mud, rocks and woodland trails.

Key features

• LCG design: tub chassis (low bed) for a low centre of gravity and tip-over stability
• Metal portal axles at the front and rear for increased ground clearance and a scale-accurate look
• Fully ball-bearing-equipped all-metal gearbox with a plastic main gear, and U-joint driveshafts
• Battery compartment with R-pin quick-release and hook-and-loop straps for various battery sizes
• Remote-switchable 2-speed transmission for controlled climbing (Low) or trail driving (High); gear ratios 70.30 / 30.20
• Waterproof Hobbywing 1060 60 A ESC with T-plug, suitable for 2S/3S LiPo and 7.2 V NiMH
• 25 kg metal-gear steering servo with aluminium horn and impact-buffer protection

Specifications

• Scale: 1:10
• Body: Pickup styled after the Land Cruiser 79 (LC79), painted
• Colours: Gray, Yellow
• Wheelbase: 325 mm
• Track Width: approx. 250 mm
• Ground Clearance: 65 mm
• Tyres: 2.2", approx. 116 × 42 mm
• Dimensions (L × W × H): 535 × 250 × 230 mm
• Weight: approx. 2,545 g
• Speed: approx. 20 km/h (with 3S LiPo)
• Drivetrain: 4WD (all-wheel drive)
• Motor: 550 high-torque brushed motor (32T), 14T pinion
• ESC: Hobbywing 1060, 60 A, waterproof, T-plug
• Steering Servo: 25 kg, metal gears, with buffer protection
• Battery: 2S/3S LiPo (7.4 / 11.1 V) or 7.2 V NiMH – not included
• Radio System: 2.4 GHz, 4-channel transmitter with 6-channel receiver
• In the box: 1× pre-assembled YK41011 Crawler (RTR); 1× painted body; 1× 2.4 GHz remote control; 1× instruction manual
• Notes: Still required: drive battery (2S/3S LiPo or NiMH), a compatible charger and 4 × AA batteries for the transmitter