Υδρόψυκτρο All-in-One NZXT Kraken Plus 360 12 cm Μαύρο Fluid Dynamic Bearing

The NZXT Kraken Plus 360 is an all-in-one liquid cooler designed for high-performance CPU cooling with a 120 mm fan, Fluid Dynamic Bearing, and a customizable 1.54-inch square LCD. It combines a high-flow NZXT Turbine pump, reinforced tubing, and an optimized split-flow cold plate to deliver efficient heat transfer while maintaining low noise levels. Tool-free mounting brackets and pre-applied thermal paste simplify installation and support modern Intel and AMD sockets.

Advantages

The Turbine pump provides high flow and head pressure for effective cooling under heavy workloads while operating quietly. The built-in 1.54" LCD is fully customizable via NZXT CAM to show temperatures, images, GIFs, and web integrations. High-static-pressure 120 mm fans and Zero RPM Mode balance airflow and silence, and reinforced rubber tubing with nylon braiding improves durability and routing. Pre-applied thermal paste and a single breakout cable reduce installation time and cable clutter.

Suitable for

• High-performance gaming PCs and workstations
• PC builders seeking customizable visual monitoring
• Systems requiring compact 120 mm radiator cooling solutions
• Intel and AMD platforms including AM5 and LGA 1851

Key specifications

• Type: All-in-one liquid cooler
• Radiator / fan size: 120 x 120 x 25 mm fans (3x 120 mm for 360 mm radiator configuration)
• Fan bearing: Fluid Dynamic Bearing (FDB)
• Fan features: PWM support, Zero RPM Mode
• Pump: NZXT Turbine — high flow and head pressure
• Display: 1.54" square LCD, customizable via NZXT CAM
• Cold plate: Split-flow copper cold plate
• Tubing: Reinforced rubber with nylon-braided sleeving
• Supported sockets: Socket AM5, Socket AM4, LGA 1700, LGA 1200, LGA 1156, LGA 1155, LGA 1151, LGA 1150 (includes AM5 and LGA 1851 compatibility as noted)
• Noise level example: 30 dB (manufacturer indication)
• Colour: Black

How to use

Mount the radiator inside a compatible case location that supports a 360 mm radiator using the supplied tool-free brackets. Apply the pre-applied thermal paste on the cold plate and secure the pump housing onto the CPU socket following the included instructions for your specific Intel or AMD socket. Connect the single breakout cable to the motherboard and fans, then install NZXT CAM to configure the pump and fan curves, and to customize the LCD display.

Recommendations

Install the radiator where case airflow can provide fresh air through the radiator; enable Zero RPM Mode in NZXT CAM for quieter operation at low loads and update CAM to access the latest LCD integrations and pump/fan firmware.