Βάση στήριξης ιστού Extralink L700 — 700 mm γαλβανισμένος χάλυβας

Extralink L700 is a 700 mm wall mount bracket made of galvanized steel, intended for secure installation of exterior equipment such as antennas, satellite dishes and networking devices. The bracket’s welded construction and full-length arm provide stable support and alignment when fixed to a building facade. Galvanized steel coating ensures resistance to corrosion and weathering for outdoor applications.

Advantages

The galvanized steel construction offers long-term protection against rust and environmental exposure, reducing maintenance needs. Its 700 mm length provides sufficient offset from the wall to minimise signal obstruction and to accommodate larger antenna or dish diameters. The design allows straightforward mounting to vertical surfaces and delivers reliable mechanical support for outdoor equipment in residential and commercial installations.

Suitable for

• Mounting external TV and satellite dishes
• Supporting outdoor antennas for terrestrial or wireless networks
• Fixing small to medium-sized network devices, such as wireless access points or radio units
• Applications requiring a durable, weather-resistant wall-mounted support

Key specifications

• Material: galvanized steel for corrosion resistance
• Length/offset: 700 mm
• Mounting method: wall-mounted with multiple fixing points for secure attachment
• Load capacity: suitable for small to medium external antennas and dishes (refer to equipment wind-load and weight limits)
• Finish: zinc-coated surface for outdoor durability

How to use

Select an appropriate mounting location on a vertical surface with sufficient structural strength. Mark and drill holes for the bracket’s fixing points, then secure the bracket using suitable anchors or bolts for the wall material. Attach the antenna, dish or device to the bracket arm, ensuring fasteners are tightened and alignment is set as required. Verify level and orientation, then recheck all fixings after initial weather exposure.

Recommendations

Choose fixing hardware (anchors, bolts, washers) that match the wall substrate and expected loads. Inspect the bracket and mounting points periodically for corrosion or loosening, and re-tighten or replace fasteners as needed to maintain secure installation. For high-wind locations, consult device wind-load specifications and consider additional reinforcement.