Τρυπάνι Bosch SDS plus-7X 5,5 mm 215 mm

The Bosch EXPERT SDS plus-7X Hammer Bit, diameter 5.5 mm and length 215 mm, is designed for use with SDS plus rotary hammer drills. Built for drilling into concrete, reinforced concrete and hard natural stone, this single-piece 4-cutter Full Carbide Head bit offers extended service life and consistent drilling performance for fixings and installation tasks.

Advantages

The Full Carbide Head with Bosch Carbide Technology and a 4-cutter design reduces jamming on rebar and resists impact damage. A highly durable carbide tip and Bosch welding technology at the tip connection increase wear resistance and longevity, delivering up to three times the life of a standard drill bit under comparable conditions.

Suitable for

• Drilling holes in cured concrete
• Drilling hardened reinforced concrete
• Drilling hard natural stone such as granite and gneiss

Key specifications

• Brand: Bosch
• Model: EXPERT SDS plus-7X
• Type: SDS plus hammer drill bit
• Diameter: 5.5 mm
• Length: 215 mm
• MPN: 2608900067
• EAN: 4059952531403

How to use

Fit the EXPERT SDS plus-7X bit into an SDS plus rotary hammer according to the drill manufacturer's instructions. Select the hammer drilling mode for concrete and reinforced concrete. Apply steady pressure and allow the bit to work without excessive force; withdraw periodically to clear debris when drilling deep holes. Use appropriate personal protective equipment and secure the workpiece before drilling.

Recommendations

For best results, use this bit in SDS plus rotary hammers designed for hammer drilling in concrete. Avoid using the bit in pure rotary (non-hammer) mode on hard masonry and do not apply lateral forces. Replace the bit when wear affects cutting performance or centring accuracy.