Τροφοδοτικό MEAN WELL LPC-35-700 35W εσωτερικού χώρου 110-230V Λευκό

The MEAN WELL LPC-35-700 35W Indoor power adapter is designed for lighting applications requiring a compact, reliable constant-current source. It accepts a wide input range of 110–230V AC and provides a stable output appropriate for many indoor LED fixtures. The housing is compact — 40mm wide, 148mm deep and 30mm high — making it simple to integrate into junction boxes, luminaires, or compact enclosures. The unit is RoHS compliant and intended for indoor use.

Advantages

This power adapter offers a consistent 35W output with regulated current suitable for LED loads, reducing flicker and improving lamp lifetime. Its wide input voltage range allows use in varied mains environments without additional configuration. The small footprint and low-profile design enable flexible installation in tight spaces. Compliance with RoHS standards confirms reduced hazardous substances in its construction.

Suitable for

• Powering indoor LED fixtures and linear LED modules
• Lighting retrofit projects in residential and commercial interiors
• Integration into luminaires, ceiling fixtures, and small lighting enclosures

Key specifications

• Output power: 35W
• Input voltage: 110–230V AC
• Form factor: indoor, low-profile housing
• Dimensions: 40 mm (W) × 148 mm (D) × 30 mm (H)
• Regulation type: constant-current output suitable for LED loads
• Environmental compliance: RoHS

How to use

Install the adapter in a dry, indoor location with adequate ventilation and secure mounting. Connect the AC mains input to the 110–230V supply using appropriate wiring and protective devices in accordance with local electrical codes. Connect the adapter output to the LED load, observing correct polarity and current requirements for the fixture. Ensure all connections are insulated and strain-relieved. Power the unit and verify correct operation and absence of flicker before finalizing installation.

Recommendations

For optimal performance, match the LED load current and total wattage to the adapter’s rated output and keep ambient temperature within the manufacturer’s recommended range. Avoid installation in damp or outdoor locations unless additional protection is provided. Use a qualified electrician for permanent wiring and comply with local safety regulations.