TRANSCEND SSD 230s 4TB 2,5 inch SATA III 6 Gb/s TLC θήκη αλουμινίου

Transcend's SSD disk TS4TSSD230S is a 2.5" SATA III solid-state drive with 4 TB capacity that uses 3D NAND technology. Combining vertical stacked memory cells, high-quality flash and optimized firmware, this SSD delivers sustained performance and durability suitable for upgrading desktops and laptops. The SATA III 6 Gb/s interface and built-in SLC caching enable transfer speeds up to 560 MB/s read and 520 MB/s write, while software tools help monitor and maintain drive health.

Advantages

3D NAND architecture increases memory density and endurance compared with planar NAND, providing higher performance and longer service life. The drive achieves high sequential read/write speeds via the SATA III interface and SLC caching technology. Transcend SSD Scope software offers condition monitoring and optimization tools. Compared with traditional hard disk drives, the SSD is faster, lighter, consumes less power, is quieter in operation and is more shock-resistant.

Suitable for

• Upgrading desktops and laptops to improve boot and application load times
• Storing large files, multimedia libraries and project data
• Everyday computing tasks such as web browsing, office work and media playback
• Users who need a reliable secondary or primary drive with high endurance

Key specifications

• Model: TS4TSSD230S
• Capacity: 4 TB (4000 GB)
• Form factor: 2.5"
• Interface: SATA III (6 Gb/s)
• Sequential read speed: up to 560 MB/s
• Sequential write speed: up to 520 MB/s
• Technology: 3D NAND with SLC caching
• Weight: 0.053 kg

How to use

Install the 2.5" Transcend SSD into a compatible SATA bay in a desktop or use a 2.5" to 3.5" adapter if required. Connect the SATA data and power cables to the motherboard and power supply, or install into a compatible laptop SATA slot. Initialize and format the drive in your operating system if necessary, then use cloning software to migrate your existing system or copy files to the new drive. Install Transcend SSD Scope to monitor drive health and optimize performance.

Recommendations

For best results, enable AHCI mode in BIOS/UEFI, use the SATA III port on the motherboard, keep firmware and SSD Scope software updated, and avoid filling the drive to full capacity to maintain performance and endurance.