Συσκευή πλαστικοποίησης Olympia A296 Plus 300 mm/min

The Olympia A296 Plus 300 mm/min is a compact laminator designed for home and office use, providing hot and cold laminating for documents up to A4 size with a maximum laminating width of 230 mm. It accepts pouches with thicknesses of 80, 125 and 175 micron, features a high-quality heating system, jam release function and an automatic switch-off to prevent overheating. The unit has a short warm-up time of approximately 3–5 minutes and a lamination speed of 300 mm/min, with LEDs indicating temperature and pouch thickness. Its compact modern design includes a large rear tray for convenient handling of pouches and a power rating of 260 W with AC input 220–240 V.

Advantages

The laminator supports both hot and cold lamination, allowing use with a variety of pouch types and sensitive materials. Multiple pouch thickness options (80, 125, 175 micron) cover common lamination needs. A fast warm-up and steady laminating speed make it suitable for quick tasks, while safety features such as automatic switch-off on overheating and a jam release mechanism simplify operation and maintenance. The rear tray and compact dimensions facilitate storage and handling in small workspaces.

Suitable for

• Laminating A4 documents and photos
• Protecting posters, certificates and ID cards
• Lamination of teaching materials and office prints

Key specifications

• Laminating type: hot and cold
• Maximum pouch width: 230 mm (A4)
• Pouch thickness supported: 80 µm, 125 µm, 175 µm
• Laminating speed: 300 mm/min
• Warm-up time: 3–5 minutes
• Power: 260 W, AC 220–240 V
• Dimensions: 340 × 131 × 70 mm
• Weight: 1.24 kg
• Colour: Silver, White

How to use

Place the laminator on a stable, flat surface and connect it to a suitable AC outlet (220–240 V). Select hot or cold mode according to the pouch and material; insert the pouch with the document centered and sealed at the leading edge, then feed it into the laminating path. Allow the unit to warm up for approximately 3–5 minutes before use; LEDs indicate readiness and pouch thickness settings. If a jam occurs, use the jam release mechanism following the manufacturer's guidance and allow the device to cool if it has triggered the automatic switch-off due to overheating.

Recommendations

Use recommended pouch thicknesses (80, 125, 175 micron) and avoid forcing oversized items through the laminator. For heat-sensitive materials choose cold lamination. Allow the unit to warm up fully for consistent results and keep the rear tray clear for easy handling of finished pouches.