STEINEL IS 345 MX-E KNX V3AP Ανιχνευτής κίνησης, λευκό 058296

The IS 345 MX-E KNX V3AP brings KNX-native presence and motion detection to large indoor and outdoor areas, with a 240° PIR coverage pattern and four independent channels for lighting, HVAC, presence, and temperature. Unlike conventional detectors, it integrates directly into KNX bus systems without additional gateways, enabling constant light control, scene logic, and multi-sensor automation from a single device.

Highlights

• 240° passive infrared detection with up to 20 m tangential reach
• Four KNX channels: light, HVAC, presence, temperature
• Integrated temperature sensor for climate control
• IP54-rated for outdoor and indoor use
• Powered directly from KNX bus (21–30 V DC)

In daily use

Mount the detector at 2.00–4.00 m height on a wall or corner for optimal coverage. Through KNX, adjust twilight threshold from 2–1000 lux and switch-off delay from 30 seconds to 15 minutes. The 11 detection levels and 1416 switching zones provide fine-grained presence mapping, making it suitable for corridors, warehouses, loading ramps, and underground garages.

Full specifications

• Sensor technology: Passive Infrared (PIR)
• Detection angle: 240°
• Tangential reach: up to 20 m
• Radial reach: up to 6 m
• Detection zones: 11 levels, 1416 switching zones
• Recommended installation height: 2.00–4.00 m (optimal 2.80 m)
• Time setting: 30 s – 15 min (via KNX)
• Twilight setting: 2–1000 lux (via KNX)
• Mounting type: Wall, Corner (with optional corner bracket)
• IP rating: IP54
• Power supply: KNX Bus Voltage (21–30 V DC)
• Operating temperature: -20 to +50 °C
• Housing material: UV-resistant plastic
• Product colour: White

Final note

For large-scale KNX projects, the IS 345 MX-E KNX V3AP consolidates motion, presence, and temperature sensing into one bus-powered device, reducing wiring and commissioning effort.