Στεγνωτήριο filament Creality Space Pi Plus — γκρι, για νήματα 3D εκτυπωτή, 1 τεμ.

Creality Space Pi Filament Dryer Plus

The Creality Space Pi Filament Dryer Plus is an advanced filament dryer that is designed to double drying capacity. With the ability to accommodate two rolls of filament at the same time, this device provides fast and efficient drying, resulting in better quality 3D prints. The dryer is equipped with precise temperature control and 360° PTC technology, which guarantees even heating and effective removal of moisture from the filaments, preventing problems such as nozzle clogging, poor layer adhesion or misalignment during printing.

Double drying performance

The Creality Space Pi Filament Dryer Plus can accommodate two rolls of filament weighing up to 1 kg each, allowing more material to be dried simultaneously. The unit is equipped with four filament slots and PTFE tubes, allowing users to use a wide range of filaments and connect the dryer to two 3D printers simultaneously. This design makes it ideal for larger-scale printers who need an efficient tool for preparing filaments.

Advanced PTC heating technology

The Creality Space Pi Plus Dryer uses 360° dual PTC heating technology, which provides fast and even heating of the filaments. As a result, the device effectively removes moisture from the material, which significantly improves the quality of prints. Compared to standard PI heating pads, PTC technology is more efficient, energy-saving and environmentally friendly.

Easy operation and precise control

The unit is equipped with a 4-inch touchscreen that allows easy monitoring of real-time drying parameters such as temperature, humidity and remaining drying time. A setting memory function allows for quick resumption of operation after any power interruption, eliminating the need for re-configuration and speeding up the drying process. The dryer supports 12 popular types of filaments, and with the one-button function, you can easily adjust the drying parameters for your specific material.

Versatility and safety

The Creality Space Pi Filament Dryer Plus is compatible with 1.75mm and 2.85mm diameter filaments, making it a versatile tool for many 3D printers. The device has additional features such as switching between degrees Celsius and Fahrenheit, a power on/off switch for increased safety, and a silicone plug to protect against moisture. These features make the dryer not only efficient, but also safe to use, providing optimal conditions for drying filaments before 3D printing.

How to use

Place a filament spool inside the Creality Space Pi Plus dryer, close the unit according to the manufacturer's instructions and set the appropriate drying time and temperature for the filament type being used. Typical practice is to select lower temperatures for PLA and higher but material-safe temperatures for hygroscopic materials such as Nylon or PETG. After drying, feed the filament directly from the dryer to the printer if the device supports continuous feeding, or store the spool in a dry environment until use.

Recommendations

Follow the filament manufacturer's guidance for recommended drying temperatures and durations. Monitor filament condition after drying and avoid exceeding safe temperatures for the material. Position the dryer on a stable surface away from direct heat sources and ensure electrical connections comply with local safety rules.