Spectrum Filament PLA Premium High Speed Crimson Red 1,75mm 1kg (81055)

High-speed 3D printing often forces a compromise between speed and surface quality, leaving visible layer lines or weak interlayer bonding. Spectrum PLA Premium High Speed in Crimson Red solves this by delivering consistent extrusion and strong layer adhesion even at elevated print speeds, so prototypes and functional parts retain a smooth, vivid finish without slowing down production.

Who is it for

Makers, educators, and small-batch manufacturers running FDM printers who need to cut print times without sacrificing part strength or colour consistency. It suits anyone printing visual models, jigs, or end-use parts where a rich red tone and reliable mechanical properties matter.

Main features

• Optimised for high-speed printing with stable melt flow and low warping
• Excellent layer adhesion for strong, durable parts
• Precision diameter of 1.75 mm with ±0.02 mm tolerance and ±0.01 mm ovality
• Vivid crimson red colour with consistent pigmentation
• Biodegradable PLA base, vacuum-sealed with desiccant for moisture protection

Specifications

• Material: PLA (Polylactic Acid)
• Filament type: Premium High Speed
• Colour: Crimson Red
• Diameter: 1.75 mm
• Net weight: 1 kg
• Diameter tolerance: ±0.02 mm
• Ovality tolerance: ±0.01 mm
• Recommended print temperature: 190–220 °C
• Recommended bed temperature: 0–60 °C
• Density: 1.24 g/cm³
• Tensile strength: 50–65 MPa
• Elongation at break: 2–6%
• Heat deflection temperature (HDT): 55 °C at 0.45 MPa
• Shore hardness: D60
• Melt flow index (MFI): 7–9 g/10 min (190 °C, 2.16 kg)
• Compatibility: FDM 3D printers

Tips

For best results, store the spool in a dry box when not in use and dry it at 45–50 °C for 4–6 hours if exposed to humidity. Start with a nozzle temperature of 205 °C and adjust within the recommended range to match your printer's speed and cooling capabilities.