Σκληρός δίσκος SSD Kingston Technology 7680G 7,68 TB 2,5 ίντσες SATA SEDC600M/7680G

The Kingston DC600M 7.68TB 2.5" SATA SSD is a fourth-generation data center drive designed for mixed-use server workloads. Built on 3D TLC NAND and SATA 3.0 (6 Gbps), the drive provides low latency, consistent I/O performance and on-board power loss protection via hold-up capacitors to help protect data and enable successful reinitialisation after unexpected power failures. The DC600M is intended for system integrators, hyperscale data centres and cloud service providers seeking predictable service levels and enterprise-class reliability.

Advantages

The drive delivers consistent performance and low latency optimised for server RAID and mixed-use environments, with hardware-based power-loss protection to safeguard in-flight data. DC600M models are available in capacities up to 7.68 TB and provide predictable quality of service (QoS) to help meet service-level agreements. The DC600ME variant adds AES 256-bit hardware encryption and TCG Opal 2.0 support for enhanced data security.

Suitable for

• Enterprise and hyperscale data centre servers
• Mixed-use server workloads and RAID arrays
• Cloud service provider storage tiers requiring consistent I/O
• Workstations and systems needing high-capacity SATA SSDs

Key specifications

• Form factor: 2.5" SATA
• Interface: SATA 3.0 (6 Gbps)
• Capacity: 7.68 TB (7680 GB)
• Read speed: up to 560 MB/s
• Write speed: up to 530 MB/s
• NAND: 3D TLC
• Weight: 0.071 kg
• Power-loss protection: onboard hold-up capacitors (hardware PLP)
• Encryption: AES 256-bit and TCG Opal 2.0 (DC600ME variant)

How to use

Install the 2.5" SATA SSD into a compatible drive bay or server chassis and connect it to a SATA 3.0 (6 Gbps) port using the appropriate cable or backplane. Configure RAID or single-disk settings in the system BIOS or RAID controller as required, then initialise and format the drive within the operating system. For the DC600ME model, enable hardware encryption and manage security settings according to your organisation's policies using supported management tools.

Recommendations

Use the DC600M/DC600ME in systems with SATA 3.0 ports and proper power management. Ensure firmware is kept up to date and follow server vendor guidelines for RAID configuration and thermal management. Choose the DC600ME if hardware-based AES 256-bit encryption and TCG Opal 2.0 support are required for data-at-rest protection.