Καλώδιο τροφοδοσίας Μαύρο 2,5 m S/CONN 60016

The ShiverPeaks Power Cable Black 2.5 m S/CONN 60016 is a 2.5-metre power lead with IEC C20 to IEC C19 connectors designed for reliable mains connection between compatible equipment. Its construction focuses on stable conductivity and mechanical durability to support continuous operation in both domestic and professional environments. The cable’s length provides flexibility for rack-mounted equipment, server cabinets and power distribution units while maintaining a tidy installation.

Advantages

The cable offers a secure IEC C20 to IEC C19 connection with low-resistance conductors and robust outer insulation that resists wear and flexing. Its 2.5 m length balances reach and cable management, reducing the need for extensions. The black finish integrates discreetly into server rooms and home setups, and the molded connector housings improve strain relief at termination points for extended service life.

Suitable for

• Connecting power distribution units (PDUs) to servers and network equipment
• Powering rack-mounted devices in data centres and server rooms
• Linking uninterruptible power supplies (UPS) to compatible equipment
• Temporary or permanent power connections in IT cabinets and control panels

Key specifications

• Cable length: 2.5 metres
• Connector types: IEC C20 (male) to IEC C19 (female)
• Colour: Black
• Construction: Molded connector housings with flexible insulated conductors
• Typical use: Mains power transmission for IT and professional equipment

How to use

Inspect the cable for visible damage before use and ensure both connected devices are powered off prior to insertion. Insert the IEC C20 plug into the power source or PDU socket and the IEC C19 connector into the equipment inlet until the connections are fully seated. Route the cable to avoid sharp bends or pinch points and secure as required to prevent strain on the connectors. When disconnecting, grip the connector housing rather than the cable jacket to remove the plug.

Recommendations

For reliable operation, avoid running the cable near heat sources, sharp edges or high-traffic walkways. Periodically check connections for tightness and inspect the outer insulation for signs of wear; replace the cable if any damage is found. Use the 2.5 m length to maintain orderly cable routing in racks and to minimize excess cable loops that could obstruct airflow.