Καλώδιο HDMI S/CONN 10-05075 10 m

The ShiverPeaks HDMI Cable S/CONN 10-05075 10 m is a 10-metre high-speed HDMI cable with HDMI Type A connectors on both ends. It supports a data transfer rate of up to 18 Gbit/s, 3D content and Audio Return Channel (ARC), and is finished in black with gold-plated connector contacts to improve conductivity and reduce corrosion. This cable is intended for reliable transmission of high-definition video and multi-channel audio between compatible devices at longer distances.

Advantages

This 10 m HDMI cable provides stable high-bandwidth transmission up to 18 Gbit/s, enabling Full HD and many 4K signals where supported by connected equipment. Gold-plated connectors enhance contact reliability and resistance to oxidation. The symmetrical HDMI Type A ends make it simple to connect TVs, projectors, AV receivers and game consoles without adapter cables.

Suitable for

• Connecting a TV to a set-top box, Blu-ray player or streaming device
• Linking a projector to a laptop or media player in conference rooms or home cinema setups
• Connecting gaming consoles to displays or AV receivers for audio and video
• Extending cable runs where devices are spaced apart by up to 10 metres

Key specifications

• Cable length: 10 m
• Connector type: HDMI Type A on both ends
• Maximum data rate: 18 Gbit/s
• Supports: 3D and Audio Return Channel (ARC)
• Connector plating: gold-plated contacts
• Colour: black

How to use

Ensure connected devices are turned off when plugging in the HDMI cable to avoid electrical noise. Insert each HDMI Type A connector firmly into the HDMI ports of the source and display devices until they seat securely. After connection, power on the devices and select the corresponding HDMI input on the display. If necessary, adjust the output resolution or audio settings on the source device to match the display capabilities.

Recommendations

For best results, avoid sharp bends or kinks in the cable and maintain gentle curves with a minimum bend radius comparable to the cable diameter. Keep the cable away from strong electromagnetic sources and run it alongside power lines only when necessary to minimize interference. If a display does not receive a signal at higher resolutions, try lowering the output resolution or testing with a shorter cable to verify device compatibility.