ShiverPeaks BS70093 3 m μαύρο καλώδιο τηλεφώνου

The ShiverPeaks BS70093 3 m Black telephone cable connects devices with a TAE (F) socket to equipment using an RJ-11 plug. With a three-metre length and a flexible jacket, this cable provides the reach and mobility needed to position phones or telephony devices conveniently while maintaining stable voice transmission and low interference. Its straightforward two-connector design is compatible with common analogue telephone installations and small office setups.

Advantages

This telephone cable combines a TAE (F) connector and an RJ-11 plug to ensure a secure electrical connection between different interface types. The 3 m length gives extra reach without excess slack, and the durable outer sheath resists everyday wear and bending. The cable’s construction supports clear voice signals and reduces crosstalk and noise, while the compact connectors allow easy insertion and removal in wall sockets and devices.

Suitable for

• Connecting analogue telephones to wall sockets with TAE (F) outlets
• Home and small office voice telephony setups
• Replacing worn or damaged handset or extension leads
• Temporary or permanent phone line connections where a 3 m length is required

Key specifications

• Cable length: 3 metres
• Colour: Black
• Connector A: TAE (F)
• Connector B: RJ-11
• Conductor type: insulated copper conductors (standard telephone cable construction)
• Sheath: flexible PVC outer jacket for durability and bending

How to use

Insert the TAE (F) connector into the corresponding wall socket or device port until it clicks or seats firmly. Plug the RJ-11 connector into the telephone or other compatible device. Arrange the cable to avoid sharp bends or tight loops and secure with cable clips or ties if necessary to prevent strain on the connectors. If replacing an existing lead, remove the old cable before fitting the new one, and test the line for clear dial tone and call quality after installation.

Recommendations

For optimal long-term performance, avoid routing the cable near strong electrical interference sources such as large motors or high-voltage wiring. Use the 3 m length to position devices while keeping gentle curves rather than tight bends to preserve conductor integrity. Inspect connectors periodically for corrosion or damage and replace the cable if voice quality deteriorates.