SFP+ Transceiver-Modul BlueOptics 55113707-BO 10000 Mbit/s

The BlueOptics 55113707-BO SFP+ transceiver module is a compact fiber optic interface designed for 10 Gigabit Ethernet links. With a maximum data transfer rate of 10000 Mbit/s and support for single-mode connections up to 10000 m, this SFP+ form-factor module provides a space-efficient solution for uplinks, switches and network devices that accept hot-pluggable SFP+ modules. The module is finished in silver and has a low unit weight, while a high MTBF ensures long operational life. It is manufactured in accordance with CE, FCC and RoHS standards.

Advantages

The module offers a standard SFP+ footprint for broad device compatibility and supports 10 Gigabit Ethernet speeds for high-throughput links. Its LC fiber connector provides reliable mating with common single-mode fiber patch cords. A rated maximum transfer distance of 10000 m suits long-reach links within campus and metropolitan networks. The compact design and hot-pluggable form factor simplify installation and maintenance without requiring device shutdown.

Suitable for

• 10 Gigabit Ethernet uplinks between switches and routers
• Long-distance single-mode fiber connections up to 10 km
• Data center server and storage interconnects using SFP+ ports
• Network equipment upgrades where SFP+ transceivers are required

Key specifications

• Form factor: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Maximum transfer distance: 10000 m (single-mode)
• Ethernet interface type: 10 Gigabit Ethernet
• Fiber optic connector: LC
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Insert the BlueOptics SFP+ module into an empty SFP+ slot on a compatible switch, router or network device until it latches. Connect a single-mode LC patch cable between the module and the remote transceiver or fiber infrastructure, observing correct fiber polarity. The device should automatically detect the module and establish the link at 10 Gigabit Ethernet speeds if the connected equipment supports the transceiver specifications. Remove the module by releasing the latch and pulling it straight out while the host device is powered down or following the manufacturer's hot-swap guidance.

Recommendations

Use certified single-mode LC patch cords and verify device compatibility before installation. Operate within specified temperature and handling guidelines, avoid contaminating connector endfaces, and inspect/clean connectors with appropriate cleaning tools to ensure optimal optical performance.