Σετ λωρίδων λείανσης Bosch 2607017156 — κόκκο λείανσης 60, 80, 100, μέγεθος 457×75 mm

Bosch sanding belt set 2607017156 contains abrasive belts in three grits — 60, 80 and 100 — sized 457×75 mm. The set is intended for use with compatible belt sanders and is suitable for tasks ranging from aggressive material removal to medium and fine sanding. These belts are designed for woodworking and similar surfaces, enabling faster stock removal, leveling of uneven areas and preparation of surfaces before finishing.

Advantages

The set provides a selection of commonly used grits that reduces the need to change belts frequently during a project. Abrasive backing and grit distribution are matched to deliver consistent cutting performance and acceptable lifetime under normal woodworking conditions. Uniform belt dimensions ensure reliable fit and tracking in belt sanders designed for 457×75 mm belts. Using this set helps streamline sanding workflow for coarse shaping as well as subsequent smoothing stages.

Suitable for

• Coarse stock removal and shaping of wooden components
• Leveling uneven surfaces and removing old finishes
• Pre-sanding before primer, stain or paint application
• Intermediate sanding between working stages

Key specifications

• Grit sizes: 60, 80, 100
• Belt dimensions: 457 × 75 mm
• Intended material: wood and similar substrates
• Compatibility: belt sanders for 457×75 mm belts

How to use

Select the appropriate grit for the task: start with the coarse (60) grit for heavy material removal or paint/varnish stripping, switch to 80 grit for intermediate shaping and 100 grit for smoothing and surface preparation. Fit the belt to a compatible belt sander according to the sander manufacturer's instructions, ensure correct tracking and tension, and work with steady, even passes. Avoid excessive pressure and do not let the sander stall; keep the tool moving to prevent gouging and heat buildup that can shorten abrasive life.

Recommendations

For best results, inspect the workpiece and select the lowest-grit belt that achieves the required removal rate, then progress to finer grits for smoothing. Use appropriate personal protective equipment (dust mask, eye protection, hearing protection) and dust extraction where available to maintain a clean working environment and extend belt life.