Νήμα ASA γκρι 1,75 mm 1 kg refill pack Rosa3D

ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat.

ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions.

ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS.

The filament has less shrinkage and the vapors produced are much less irritating.

The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C.

The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers.

Recommended printing parameters

• Extrusion temperature: 220-250°C
• Bed temperature: 90-110°C

The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).

• It is recommended to print in a closed chamber.
• PRODUCT PARAMETERS
• Color: gray
• Diameter: 1.75 mm
• Weight: 1000 g (vacuum packed)
• Density: 1.07 g/cm3
• Odor: almost odorless
• Vicat softening point: 94 ° C (ASTM 1525)
• Diameter tolerance: +/- 0,05
• Oval tolerance: +/- 0,02
• Tensile elongation: 35 %
• Tensile strength (to break): 40 MPa

Printable model for refill spool sides you can download here