Ρομποτική σκούπα Dreame Aqua10 Ultra Track Μαύρο

The Dreame Aqua10 Ultra Track is a round robot vacuum and mop designed for automated floor cleaning in homes. It combines strong suction, structured navigation and an automatic self-service base to vacuum, wash and dry cleaning pads with minimal user input. The device supports wet mopping, returns to its base automatically, and is available in black and white finishes.

Advantages

High suction power and advanced obstacle recognition enable effective removal of dust, hair and debris from different floor types. The self-service base washes, dries and sanitises the mop using hot water and UV, reducing maintenance. A large water tank and long battery life allow extended cleaning sessions covering substantial floor areas with reduced need for manual intervention.

Suitable for

• Homes with mixed floor types (hard floors and low-pile carpets)
• Households with pets and children
• Large apartments or houses up to around 250 m² per charge

When it may not be suitable

This robot is not intended for heavy industrial or workshop environments where large amounts of coarse debris, liquids, or construction dust are present. It may also be less effective on very high-pile carpets or cluttered spaces that prevent the robot from mapping and accessing some areas.

Key specifications

• Maximum suction: up to 25,000 Pa
• Navigation: LiDAR + 3D structured light + AI camera
• Battery capacity: 6,400 mAh, up to approximately 4 hours runtime
• Cleaning area per charge: up to about 250 m²
• Water tank capacity: 4 L
• Base station dust capacity: 3.2 L
• Dimensions: diameter 35 cm, height 97.5 mm
• Weight: 5.5 kg
• Colours: Black, White

How to use

Place the charging and self-service base on a flat surface with sufficient clearance and connect it to power. Charge the robot before first use, then set cleaning parameters in the companion app or use voice control via supported assistants. For wet mopping, fill the water tank and ensure cleaning solution or pads are installed according to the base station instructions. The robot will map the area on its first run; confirm or edit zones and no-go areas in the app. After cleaning the self-service base automatically empties, washes and dries the mop head.

What to consider before purchase

• Floor types in your home (very deep-pile carpets may be unsuitable)
• Available clearance around the base station and docking area
• Need for large-area cleaning and frequency of automatic maintenance
• Compatibility with voice assistants if required

Recommendations

Remove large loose objects and cables from floors before operation, perform an initial mapping run to create accurate room maps, and periodically check and replace consumables supplied in the extended kit to maintain cleaning performance.