Ρητίνη UV/LCD Standard-Πράσινη για 3D εκτυπωτή 1 L Flashforge 405 nm

Flashforge standard green UV/LCD 3D printing resin in a 1 L bottle is formulated for use with 405 nm UV and LCD-based SLA/MSLA printers. This general-purpose resin provides consistent curing behavior and fine surface detail suitable for prototypes, scale models and small production parts. The material is presented in a ready-to-use liquid form and is intended for users who require predictable layer adhesion, dimensional stability and a neutral green color for visualization or post-processing workflows.

Advantages

The resin offers stable photopolymerization at 405 nm wavelength, enabling uniform layer curing and minimal warping when used within recommended exposure settings. It delivers good surface finish and fine detail reproduction, which reduces the need for extensive post-processing on typical small-to-medium prints. The 1 L volume accommodates multiple prints and test iterations, making it practical for both hobbyist and professional environments where repeatability is important.

Suitable for

• Prototyping of small mechanical parts and enclosures
• Scale models and miniatures requiring fine detail
• Design verification and form-fit testing
• Small-batch production runs and iterative design workflows
• Educational and hobbyist printing projects

Key specifications

• Color: standard green
• Form: liquid photopolymer resin
• Recommended curing wavelength: 405 nm
• Volume: 1 litre
• Compatibility: UV/LCD SLA and MSLA printers that use 405 nm light sources
• Typical use: general-purpose printing for prototypes, models and small parts

How to use

Before use, shake or stir the bottle gently to ensure homogeneous pigment and additive distribution. Pour the required amount into the printer vat following the printer manufacturer's guidelines and recommended fill levels. Select exposure settings appropriate for 405 nm resin and the specific layer height and printer model; run test prints to fine-tune exposure time and lift speed. After printing, remove parts carefully, rinse in isopropyl alcohol or a compatible solvent to remove uncured resin, and post-cure as recommended for final mechanical properties and full polymerization.

Recommendations

Work in a well-ventilated area and use appropriate personal protective equipment such as nitrile gloves and eye protection. Avoid skin contact and inhalation of vapors. Store the resin in a cool, dark place away from direct sunlight and heat sources. Dispose of waste resin and contaminated solvents according to local regulations. For best results, follow printer-specific exposure guides and perform calibration prints when changing layer height or switching to a different printer model.