Raise3D PMRA-1014-003 Hyper Speed ABS Νήμα, 1,75 mm, 1 kg, Γκρι

Printing functional parts with standard ABS often means slow speeds and a risk of warping. The Raise3D Hyper Speed ABS Filament addresses this by offering a material optimized for high-speed printing while retaining the strength and toughness expected from ABS.

Who is it for

Engineers and makers who need durable prototypes, tools, jigs, and end-use parts on FDM printers, especially Raise3D systems, and want to reduce print time without sacrificing mechanical properties.

Main features

• Hyper Speed series for high-speed printing
• ABS material with high impact strength and good toughness
• 1.75 mm diameter with ±0.02 mm tolerance
• 1 kg net weight on a standard plastic spool
• Grey colour

Specifications

• Material: ABS (Acrylonitrile Butadiene Styrene)
• Filament diameter: 1.75 mm
• Filament weight: 1 kg
• Colour: Grey
• Recommended nozzle temperature: 240-260 °C
• Recommended bed temperature: 90-110 °C
• Density: ~1.04 g/cm³
• Heat deflection temperature: ~90-105 °C
• Moisture sensitivity: Moderate

Tips

Store in dry conditions to prevent moisture absorption. Use an enclosure to minimize warping and improve layer adhesion. Ensure your printer's hotend and firmware support the higher temperatures required for ABS.