Προσαρμογέας στήριξης Dahua Technology PFA106 Universal λευκό 1kg 13,4cm

The Dahua Technology PFA106 Universal White mount adapter is a compact accessory for CCTV installations. Designed as a general-purpose interface between camera housings and mounting surfaces, it offers a clean white finish and a lightweight construction. The adapter supports devices up to 1 kg and presents a cylindrical footprint with a diameter of 13.4 cm and a height of 83.5 mm, making it suitable for indoor and sheltered outdoor installations where a low-profile connection is required.

Advantages

The mount adapter provides a standardized connection that simplifies installation and alignment of surveillance cameras. Its modest weight of 290 g reduces load on mounting points while still supporting up to 1 kg of equipment. The white color helps the adapter blend into light-colored ceilings and walls, and the compact dimensions allow use in restricted spaces or within enclosures. The product's durable construction is intended for consistent mechanical support of compatible camera models.

Suitable for

• Mounting compact dome and bullet cameras up to 1 kg
• Indoor ceiling and wall installations
• Use inside camera housings or sheltered outdoor enclosures
• Upgrading or replacing existing small mounting interfaces

Key specifications

• Maximum supported load: 1 kg
• Outer diameter: 13.4 cm
• Height: 83.5 mm
• Weight: 290 g
• Color: white

How to use

Secure the adapter to a prepared mounting surface using appropriate screws or anchors for the substrate, ensuring the mounting location can bear the combined weight of adapter and device. Attach the camera or housing to the adapter following the camera manufacturer's instructions, aligning any mounting holes and cable passages. Verify that the mounted device is level and that fasteners are tightened to prevent movement. If routing cables through the adapter, ensure seals and gaskets are applied where necessary to maintain any needed environmental protection.

Recommendations

Inspect mounting surfaces for structural integrity before installation, and select fasteners appropriate for the wall or ceiling material. Do not exceed the rated 1 kg load. For outdoor or exposed installations, use additional weatherproofing measures and check compatibility with the specific camera housing to ensure a secure fit.