Λογαριασμός Επικοινωνία
Το καλάθι σας
Αποστολή με DPD & FedEx
Βοήθεια; Ρωτήστε το AI

Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm

Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
76,25 €
The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is... Περισσότερα
Απόθεμα 18 Κωδικός 1485840 Μάρκα BLUEOPTICS Μοντέλο TRPEG1EEXC000E2G-BO Εγγύηση 2 χρόνια

Αποστολή & επιστροφές

Εκτιμώμενη παράδοση Δευτέρα, Νοεμβρίου 2
Θα ενημερώνεστε μέσω του αναλυτικού μας συστήματος παρακολούθησης
Τρόποι πληρωμής
Τραπεζική κάρταVisaMastercardPayPalApple PayGoogle PayΤραπεζική κατάθεση

The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is designed to fit standard SFP ports using an LC duplex optical interface. The transceiver supports link reach up to 40,000 m over appropriate single‑mode fiber.

Advantages

The module follows MSA‑compatible SFP form‑factor standards to ensure mechanical and electrical interoperability with compatible network equipment. A compact metal enclosure provides mechanical protection and thermal stability. With support for 1310 nm optical transmission and a rated maximum distance of 40 km, the transceiver is suitable for long‑reach Ethernet and related optical protocols. Low weight and a standard 3.3 V interface simplify installation and replacement in switches, routers and media converters.

Suitable for

Key specifications

How to use

Power down or follow hot‑swap procedures recommended by your hardware vendor before inserting the SFP module into an SFP cage. Insert the transceiver into an empty SFP slot until it latches, then connect LC duplex patch cords to the transmit and receive ports, observing correct fiber polarity. Configure the host device for the intended optical link speed and protocol (up to 1250 Mbit/s) and verify link status through the device management interface. If the host supports digital diagnostic monitoring (DDM/DOM), enable or query the DDM functions to read real‑time parameters where available.

Recommendations

Use single‑mode LC duplex fiber and compatible patch cords for best range and signal quality. Verify compatibility with the target switch or router model and ensure the host firmware accepts third‑party SFP modules if required. Keep optical connectors clean and capped when not in use; follow ESD precautions when handling the transceiver.

Κύρια σημεία
  • Single‑mode fiber links up to 40 km (1000BASE‑LH style applications)
  • Gigabit Ethernet and other 1.25 Gbit/s optical interfaces
  • Installation in switches, routers, media converters and compatible SFP slots
  • Point‑to‑point backbone connections and campus interconnects
  • Maximum data rate: 1250 Mbit/s
  • Wavelength: 1310 nm
  • Maximum transfer distance: 40,000 m (40 km) over single‑mode fiber
  • Optical connector type: LC duplex (SFP form factor)
  • Supply voltage: 3.3 V
  • Product colour / finish: silver metal housing
  • Weight: approx. 0.02 kg
Χαρακτηριστικά
Αριθμός προϊόντων στη συσκευασία
1 pc(s)
Βάρος
0.02 kg
Βάρος συσκευασίας
30 g
Βύσμα οπτικής ίνας
SFP
Θερμοκρασία αποθήκευσης (T-T)
0 - 90
Θερμοκρασία λειτουργίας (T-T)
0 - 70
Μέγιστη απόσταση μετάδοσης
40000 m
Μέγιστη θερμοκρασία λειτουργίας
70 °C
Μέγιστη ταχύτητα μεταφοράς δεδομένων
1250 Mbit/s
Μήκος κύματος
1310 nm
Μήκος κύματος Rx (μέγ.)
1310 nm
Μήκος κύματος Tx (μέγ.)
1310 nm
Πρότυπο πομποδέκτη SFP
LH
Σύστημα duplex
Full
Τάση εισόδου
3.3
Τεχνολογία καλωδίωσης Ethernet οπτικής ίνας
1000BASE
Τύπος διασύνδεσης
SFP
Τύπος πομποδέκτη SFP
Fiber optic
Υλικό περιβλήματος
Metal
Χρώμα προϊόντος
Silver
Ιστορικό τιμών τους τελευταίους 6 μήνες
Πομποδέκτης SFP BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Τρέχουσα
76,25 €
Χαμηλότερη
74,03 €
Υψηλότερη
79,17 €
Μεταβολή 24 ωρών
+1,16 €   +2%
Εβδομάδα
+0,35 €   +0%
Μήνας
-0,12 €   0%

Δημοφιλή προϊόντα σε αυτή την κατηγορία

Πωλητής: UAB KUR LT · Laisvės pr. 125A, LT-06118 Βίλνιους, Λιθουανία · Κωδικός εταιρείας 303192950 · ΑΦΜ/ΦΠΑ ΕΕ LT100008198612 · Αποστολή από την ΕΕ (Λιθουανία)
Messenger
Γεια σας, είμαι ο βοηθός AI του DistriNode. Μπορώ να σας βοηθήσω να βρείτε προϊόντα, να συγκρίνετε επιλογές, να δημιουργήσετε PDF προσφορών ή να ανοίξετε αιτήματα υποστήριξης.