Πομποδέκτης SFP BlueOptics SFP-LX-LC1-BO 125 Mbit/s 1310 nm

The BlueOptics SFP-LX-LC1-BO is a single-mode fiber optic SFP transceiver module with an LC duplex connector, designed for 1310 nm optical transmission. It supports a maximum data transfer rate of 125 Mbit/s and is compatible with LANCOM hardware platforms that accept the original LANCOM SFP-LX-LC1 module. The module follows MSA standards and is certified to common industrial regulations (CE, RoHS, FCC). It is lightweight (approx. 20 g) and intended for use in switches, routers, storage systems and other network devices requiring a 1000BASE-LX form factor compatible SFP.

Advantages

The BlueOptics SFP-LX-LC1-BO offers full MSA compliance and is manufactured from components sourced from established suppliers to ensure stable performance and a long service life. It provides digital diagnostics (DDM/DOM) for real-time monitoring of supply voltage, laser bias current, transmit/receive power and temperature. The LC duplex connector allows simultaneous transmit and receive over a single-mode fiber, and the module is tested for compatibility with LANCOM platforms to ensure plug-and-play operation where the original LANCOM SFP-LX-LC1 is supported.

Suitable for

Key specifications

How to use

Install the SFP-LX-LC1-BO into a compatible SFP slot on your switch, router or storage device according to the host hardware instructions. Connect an LC duplex single-mode fiber patch cord between the module and the remote transceiver or patch panel, ensuring correct transmit/receive orientation. Verify link status and, if available, read DDM/DOM parameters from the host system to monitor voltage, laser current, optical power and temperature. Ensure the host device supports the DDM function if you intend to use the diagnostics.

Recommendations

For best performance, use high-quality single-mode LC patch cords and ensure connectors and patch panels are clean. Confirm device compatibility with the LANCOM SFP-LX-LC1 form factor before deployment and, where possible, request a sample or test the module in your environment to validate interoperability.