Polymaker Panchroma PLA 1,75 mm Λευκό 1 kg Νήμα 3D εκτυπωτή (CA19001)

The Panchroma series from Polymaker delivers a pure, consistent white PLA that prints with low odour and minimal warping. Unlike budget filaments, the 1.75 mm diameter is held to a tight ±0.03 mm tolerance, so extrusion remains smooth and predictable across long prints.

Highlights

• Material: Polylactic Acid (PLA)
• Diameter: 1.75 mm with ±0.03 mm tolerance
• Net weight: 1 kg
• Colour: White
• Series: Panchroma
• Vacuum-sealed with desiccant for moisture protection

In daily use

Print at 190–230 °C with a bed temperature of 25–60 °C or off. Recommended print speed is 30–70 mm/s. The filament has a density of 1.17–1.24 g/cm³, tensile strength of 52.9 MPa, elongation at break of 5.4 %, and a heat deflection temperature of 56.3 °C at 0.45 MPa. It is compatible with standard FDM 3D printers and has low odour and low warping.

Full specifications

• Spool diameter: 200 mm
• Spool width: 67 mm
• Spool hub diameter: 55 mm
• Packaging: Vacuum-sealed with desiccant
• Compatibility: FDM 3D Printers

Final note

A dependable white PLA for everyday prototyping and detailed models, backed by Polymaker's Panchroma quality control.