PLA-νήμα AnyCubic IPHPLRR-106 — 1 kg καρούλι, 1,75 mm, Κόκκινο

Anycubic PLA Filament 1 KG (Red) is a high-quality 1.75 mm PLA filament designed for reliable and precise 3D printing. Made primarily from corn starch, this red PLA offers good layer adhesion and consistent extrusion, making it suitable for a wide range of models and prototypes for both hobbyists and professionals.

Advantages

The filament has a uniform wire diameter and precise winding to reduce the risk of clogs and interruptions during printing. It lays down smoothly without air bubbles or bumps, ensuring even layers and accurate surface finish. Biodegradable composition contributes to a more environmentally friendly printing process while maintaining stable mechanical properties.

Key specifications

• Manufacturer: Anycubic
• Manufacturer code (MPN): IPHPLRR-106
• Material: PLA (polylactic acid, primarily corn starch)
• Diameter: 1.75 mm
• Printing temperature: 200–210°C
• Heated bed temperature: 50–60°C
• Spool weight: 1 kg

How to use

Load the 1.75 mm filament into a compatible 3D printer and set the nozzle temperature to 200–210°C and the heated bed to 50–60°C. Ensure the print bed is clean and leveled to promote good first-layer adhesion. Use moderate print speeds and enable cooling for better bridging and overhangs; adjust retraction and extrusion settings as needed to prevent stringing. After printing, allow the part to cool on the bed to reduce warping before removal.

Recommendations

Store the filament in a dry place or sealed bag with desiccant to preserve print quality. For best results on larger or detailed models, test small calibration prints to fine-tune temperature and speed settings for your specific printer.