Σετ τοποθέτησης τοίχου-ιστού Offgridtec για πάνελ 5-10W

• Suitable for 5W and 10W solar modules
• 35° tilt angle
• Suitable for solar modules with a width of 280mm

The Offgridtec wall-mast 5-10 bracket is suitable for a variety of solar modules with a power between 5 and 10 watts and enables easy mounting on a wall or a mast.

The set consists of a pair of mast clamps with matching nuts and washers, an adapter plate for mast mounting and the actual module holder, which can also be attached directly to a brick or concrete wall with the supplied screws and dowels. Corresponding elongated holes are already present on the back of the module holder.

The hole spacing can be changed using the supplied retaining plates and is max. 42cm, min. 8cm.

The bracket is made of black painted sheet steel and only first-class material was used for the screws and nuts. The bracket will securely align your solar module for many years - ideal for autonomous installations where maintenance is rarely possible.

• Mounting note: Please note that you may need to drill 2 holes in the frame of your solar module in order to screw the module to the bracket. This depends entirely on the type of solar module and the factory-made holes. If you have to drill into the frame, we definitely recommend using a depth stop when drilling so as not to damage the back of the solar module.
• Mast adapter incl. corresponding screws for mast mounting
• Base bracket for wall mounting

4 pcs. 6x15mm nuts for module attachment to the base bracket, as well as washers

• 4 screws + dowels for fastening in masonry.
• Mast diameter: max. 60mm