Μετρητής αγωγιμότητας TDS & EC Offgridtec για πόσιμο νερό και ενυδρεία

With the multifunctional measuring device from Offgridtec you can carry out precise and reliable water tests. It shows you 4 different values that you can view via the "Mode/Cal" button and then evaluate.

• Pre-calibrated at the factory
• LED display
• Practical HOLD function

Check your drinking water, your aquarium or water for industrial purposes, such as cleaning solar modules. The LED display provides all information at a glance and can be read at leisure with the hold function. The device comes pre-calibrated.

• Product info
• 4 different modes
• Automatic shut-off function
• Automatic temperature compensation
• Measures 0-9990 µS/CM and ppm
• Easy operation
• Does not measure pH value, chlorine and water hardness
• Display modes

TDS PPM (Total Dissolved Solids in Parts Per Million): This value indicates the total concentration of dissolved substances in the water in parts per million. It is the sum of all mineral and organic substances dissolved in a liquid. A value that is too high can indicate that the water contains many impurities. For your drinking water, TDS values below 600 ppm are acceptable, anything above can affect quality and taste. For industrial use, values above 500 ppm are to be classified as potentially problematic.

EC µS/CM (Electric Conductivity in Microsiemens per centimeter): The EC value measures the electrical conductivity of the water. It is directly proportional to the concentration of ions dissolved in the water. The higher the EC value, the more ions are present, which indicates higher contamination. In the industrial sector, deposits or corrosion can spread more easily on technical equipment or solar modules. Your drinking water should be between 50 and 500 µS/CM. In industry, values above 1000 µS/CM are considered the limit.

• Practical functions

With the hold function you can easily hold the measurement results and read them at your leisure. The illuminated display ensures that you can see the values clearly even in darkness or strong sunlight.

The automatic shut-off function switches the device off after 5 minutes without pressing a button. This saves electricity and extends battery life.

The automatic temperature compensation in measurement mode ensures that the measured values remain accurate regardless of temperature fluctuations.

• Dimensions; 154 x 30 x 14mm