Νήμα 3D εκτύπωσης Creality PLA γκρι 1 kg (μοντέλο 3301010466)

Creality PLA Grey 1 kg is a general-purpose 3D printing filament made from polylactic acid (PLA). Supplied on a 1 kg spool in a neutral grey shade, this filament is intended for fused filament fabrication (FDM/FFF) printers and is suitable for producing prototypes, visual models and household parts. The material offers good dimensional stability, consistent extrusion and straightforward printability on most consumer 3D printers.

Advantages

This grey PLA filament provides reliable layer adhesion and low warping tendency, enabling precise prints without complex printer setup. Its consistent diameter and stable composition promote even feeding and reduced clogging. The neutral grey colour helps with post-processing such as sanding or painting and makes surface details easy to evaluate. The filament’s formulation supports a balance between print speed and surface quality, making it suitable for routine printing tasks.

Suitable for

• Rapid prototyping and concept models
• Visual and display models requiring neutral colour
• Household replacement parts and fixtures
• Educational projects and classroom use

Key specifications

• Material: Polylactic acid (PLA)
• Spool weight: 1 kg
• Colour: Grey
• Compatibility: Consumer FDM/FFF 3D printers that accept standard filament spools
• Printing behaviour: Low warping, good dimensional stability

How to use

Load the 1 kg PLA spool into a compatible FDM/FFF printer according to the printer manufacturer’s instructions. Set nozzle temperature and print bed conditions suitable for PLA—typically a nozzle temperature within the printer-recommended PLA range and a non-heated or mildly heated bed depending on adhesion needs. Calibrate extrusion and first-layer settings to ensure correct flow and bed adhesion. Monitor the first layers, then continue printing while observing the print for consistent extrusion and layer formation.

Recommendations

For best results, store the spool in a dry environment or sealed container with desiccant to avoid moisture uptake. Use standard PLA printing temperatures recommended by your printer or filament supplier and adjust print speed for finer detail or faster builds as needed. Post-process using light sanding and common finishing techniques for paint or adhesive application.