NETGEAR 6000451 Κεραία Δικτύου 2,5 dBi

The NETGEAR 6000451 antenna improves indoor and marginal-area mobile reception by connecting to 3G/4G/5G modems or mobile hotspots with TS-9 or SMA connectors. It provides a gain of 2.5 dBi across a frequency range of 1710–5925 MHz and comes with a 100 m cable. The compact black housing (160 mm × 120 mm × 5.5 mm) is suitable for mounting in buildings, vehicles, or remote sites to extend coverage where signal strength is low.

Advantages

This antenna increases signal reception for compatible devices such as MR1100, MR5200, MR6500, MR6110 and LM1200 by providing directional gain within the stated frequency band. The long 100 m cable offers flexible placement options, and the compact, low-profile black design allows discreet installation without additional software or configuration.

Suitable for

• Improving indoor mobile data reception in homes and offices
• Extending coverage for mobile hotspots and routers in vehicles
• Boosting signal at remote sites or fringe network areas
• Connection to devices with TS-9 or SMA antenna ports

Key specifications

• Model: NETGEAR 6000451 (MPN 6000451-10000S, EAN 0606449158540)
• Frequency range: 1710–5925 MHz
• Maximum gain: 2.5 dBi
• Cable length: 100 m
• Compatible connectors: TS-9, SMA
• Compatible devices (examples): MR1100, MR5200, MR6500, MR6110, LM1200
• Colour and dimensions: Black; 160 mm × 120 mm × 5.5 mm

How to use

Connect the antenna cable to the TS-9 or SMA port on your 3G/4G/5G modem or mobile hotspot. Place the antenna where reception is strongest — near windows or on an exterior wall if used indoors, or on a stable surface inside a vehicle or at a remote site. No software or device configuration is required beyond the physical connection. Route the cable to avoid sharp bends and secure it to prevent strain on connectors.

Recommendations

For best results, try several mounting positions and orientations to identify the location with the strongest signal. Avoid placing the antenna behind large metal objects or in fully enclosed metal compartments, and check connector type (TS-9 or SMA) on your device before installation.