Motion sensor Steinel IS 3360-R KNX AP V3 IP54 360° detection

Steinel IS 3360-R KNX AP V3 is a 360° ceiling-mounted motion sensor designed for KNX systems. With an IP54 rating and a broad detection range, this sensor monitors presence and movement for lighting and automation control. The device integrates with building management via KNX and is intended for indoor and sheltered outdoor installations where reliable motion detection is required.

Advantages

The Steinel IS 3360-R KNX AP V3 offers full 360° coverage and compatibility with KNX control networks, ensuring seamless integration into automated lighting and building-control systems. Its IP54 protection provides resistance against dust and splashing water, and the compact ceiling-mount design simplifies installation while delivering consistent presence detection across large open areas.

Suitable for

• Corridors and hallways
• Stairwells and landings
• Office areas and open-plan spaces
• Entrance zones and sheltered outdoor canopies

Key specifications

• Brand: Steinel
• Model: IS 3360-R KNX AP V3
• Manufacturer part number (MPN): 058180
• EAN: 4007841058180
• Detection angle: 360°
• Protection rating: IP54
• Mounting: Ceiling / surface-mounted (AP)
• Interface: KNX

How to use

Mount the sensor on a suitable ceiling surface following the manufacturer's installation instructions and connect it to the KNX bus for configuration. Adjust detection range and time settings through the KNX parameters or the device configuration tool as needed. Verify correct functioning by walking through the detection area and observing the response on the connected lighting or automation system.

Recommendations

For optimal performance install the Steinel IS 3360-R KNX AP V3 centrally in the area to be monitored, avoid mounting near large heat sources or direct sunlight, and configure sensitivity and time delay to match occupancy patterns.