Μονάδα πομποδέκτη XFP BlueOptics 10G-XFP-SR-4-BO 10000 Mbit/s

The BlueOptics 10G-XFP-SR-4-BO is a fiber optic XFP transceiver module designed for 10 Gigabit Ethernet networks. It supports a maximum data transfer rate of 10000 Mbit/s and a maximum link distance up to 10000 m when used with appropriate multimode or singlemode fiber and compatible equipment. The module has a compact silver housing and a light weight of 20 g, and it is compatible with Extreme Networks devices to extend or upgrade existing network links with fiber connectivity.

Advantages

This transceiver offers high throughput for data center and enterprise backbones while maintaining a small form factor for dense port deployments. With an MTBF of 1,000,000 hours, it is specified for reliable continuous operation. The LC (UPC) fiber connector ensures standardized optical mating and straightforward installation into compatible XFP ports. The silver finish and low weight make it easy to handle and label during installation and maintenance.

Suitable for

• Upgrading or adding 10 Gigabit Ethernet fiber links in enterprise networks
• Data center uplinks and aggregation switches
• Interconnects between Extreme Networks compatible devices
• Long-distance fiber spans where the specified maximum transfer distance is required

Key specifications

• Maximum data transfer rate: 10000 Mbit/s
• Maximum transfer distance: 10000 m (depends on fiber type and network conditions)
• Interface type: 10 Gigabit Ethernet (XFP form factor)
• Fiber optic connector: LC (UPC)
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Install the BlueOptics 10G-XFP-SR-4-BO into an available XFP slot on a compatible switch or router, ensuring the host device supports XFP modules and the specific optics. Connect LC-terminated fiber patch cords to the module, observing proper polarity and connector cleanliness to maintain optical performance. Configure the host interface for 10 Gigabit Ethernet operation according to the network design and verify link status and speed through the device management interface.

Recommendations

For best performance, use clean LC (UPC) connectors and match fiber type and cable specifications to the intended link distance. Verify compatibility with the host device firmware and vendor compatibility lists before deployment. Perform link tests after installation and keep spare modules for critical links to reduce downtime.