Μονάδα πομποδέκτη SFP+ BlueOptics SFPP-850-SR-BO 10000 Mbit/s 850 nm

The BlueOptics SFPP-850-SR-BO is an SFP+ fiber optic transceiver module designed for 10 Gbit/s data links using an 850 nm wavelength. It supports multimode fiber connections and is supplied in a compact silver housing weighing approximately 20 g. The module is intended for high-speed network environments where a small-form pluggable interface and 10G performance are required. The manufacturer reports a mean time between failures (MTBF) of 1,000,000 hours, reflecting design focus on long-term operation.

Advantages

The module uses an SFP+ interface that fits MSA-compliant ports and supports a maximum data transfer rate of 10000 Mbit/s. Its compact, lightweight silver housing facilitates easy hot-plug installation and replacement in compatible switches, routers and storage systems. The combination of 850 nm operation and multimode fiber support makes it suitable for short-range 10GBASE-SR links, and the stated MTBF provides an indicator of expected reliability in continuous operation.

Suitable for

Key specifications

How to use

Install the BlueOptics SFPP-850-SR-BO by inserting it into an empty SFP+ port on a supported switch, router or other networking equipment while the device is powered according to the host’s hot-swap guidance. Connect LC duplex multimode fiber patch cords to the module’s transceiver interfaces, ensuring correct transmit/receive pairing. Configure the host port for 10 Gbit/s operation if required by the device software and verify link status through the switch or router management interface. Observe manufacturer and equipment vendor guidelines for electrostatic discharge (ESD) protection when handling the module.

Recommendations

Use high-quality multimode fiber patch cords and MSA-compliant LC duplex connectors for optimal performance. Confirm host hardware compatibility with SFP+ 10G modules and, if digital diagnostic monitoring (DDM) is needed, ensure the network equipment supports the feature. For short-range 10GBASE-SR links, select appropriate multimode fiber types and keep cable lengths within recommended ranges for reliable signal integrity.