Μονάδα πομποδέκτη SFP BlueOptics 15454-SFP-200-BO οπτικής ίνας 155 Mbit/s

The BlueOptics 15454-SFP-200-BO fiber optic SFP transceiver module supports a maximum data transfer rate of 155 Mbit/s and is designed for small form-factor pluggable slots. The compact silver module provides fiber connectivity for network equipment that accepts SFP interfaces and is specified with a mean time between failures (MTBF) of 1,000,000 hours. Compliance with CE, FCC and RoHS standards indicates it meets common safety and environmental requirements for professional networking hardware.

Advantages

This SFP transceiver offers a standardized SFP form factor for hot-pluggable installation, enabling straightforward upgrades or replacements without system downtime. Its support for 155 Mbit/s makes it suitable for legacy synchronous transport and PDH/E1 applications where moderate fiber link speeds are required. The low weight and compact dimensions simplify handling and installation in dense rack or chassis environments. A high MTBF value reflects design focus on long-term reliability.

Suitable for

• Fiber links requiring 155 Mbit/s data rate
• Network devices with SFP ports (switches, routers, media converters)
• Telecommunications and legacy transport equipment
• Replacement or spare module inventory for maintenance

Key specifications

• Interface type: SFP small form-factor pluggable
• Maximum data transfer rate: 155 Mbit/s
• Product colour: silver
• Weight: approximately 0.02 kg
• Reliability: mean time between failures (MTBF) around 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Ensure the host device supports SFP transceivers and the required 155 Mbit/s link mode. Power down the port or follow the vendor’s hot-swap procedure if the equipment supports hot-pluggable modules. Align the module with the SFP cage and insert it until the retention latch engages. Connect the appropriate fiber patch cable to the transceiver port, observing correct transmit/receive orientation and connector type. After installation, verify link status and configure the network device for the expected interface speed and protocols.

Recommendations

Handle the transceiver by its housing to avoid touching optical interfaces; keep dust caps on unused ports and store spares in anti-static packaging. Verify compatibility with the specific network equipment and fiber type before deployment, and perform link tests after installation to confirm signal integrity.