Μονάδα πομποδέκτη SFP BlueOptics 1200487G10-BO 125 Mbit/s

The BlueOptics 1200487G10-BO SFP transceiver module is a compact fiber-optic network interface designed for small form-factor pluggable (SFP) slots. It supports a maximum data transfer rate of 125 Mbit/s and comes in an aluminium-coloured metal housing weighing approximately 20 g. The module provides a standard SFP interface suitable for fiber connections where a low-profile, hot-pluggable transceiver is required.

Advantages

The module's SFP interface and compact aluminium housing make it easy to install and handle in network equipment with SFP ports. Low weight and standard SFP form factor allow flexible deployment in switches, routers or other compatible hardware. The product is appropriate for basic fiber-optic links that require a modest data rate and a physically robust transceiver.

Suitable for

• Basic fiber-optic network links
• Small-scale switches and routers with SFP slots
• Network setups needing a compact, hot-pluggable transceiver

Key specifications

• Interface type: SFP
• Maximum data transfer rate: 125 Mbit/s
• Housing material / colour: aluminium-coloured metal
• Weight: 0.02 kg
• Form factor: small form-factor pluggable (SFP)

How to use

Insert the BlueOptics SFP transceiver into a compatible SFP slot on your networking device while the equipment is powered down or following the manufacturer's hot-plugging guidance. Connect the appropriate fiber patch cable to the transceiver's optical port, ensuring correct fiber type and connector match your network cabling. Confirm link status and configuration in the device management interface and verify that the port operates at the expected data rate.

Recommendations

Use this transceiver with devices that explicitly support SFP modules and with single-mode or multimode fiber that matches the module's optical characteristics. Store and handle the module in a dry, static-free environment; use protective caps when the transceiver is not connected. Check the host device documentation for supported transceiver types and any required firmware or configuration settings before deployment.