Μονάδα πομποδέκτη SFP BlueOptics 10-2351-01-BO 1000 Mbit/s οπτική ίνα

The BlueOptics 10-2351-01-BO is a fiber optic SFP transceiver module designed for 1 Gbit/s network links. Housed in a silver SFP form factor, this compact module supports a maximum data transfer rate of 1000 Mbit/s and is intended for use in compatible switches, routers and media converters to provide optical connectivity. Certified to CE, FCC and RoHS standards and specified with an MTBF of 1,000,000 hours, the module targets reliable point-to-point and uplink connections in enterprise and data center networks.

Advantages

The BlueOptics module combines a small SFP footprint with fiber-optic transmission to reduce electromagnetic interference and extend link distance compared with copper interfaces. Its 1 Gbit/s rate fits a wide range of standard gigabit applications while the low weight and standard SFP form factor simplify installation and hot-swapping in network equipment. Compliance with regulatory standards ensures interoperability and reduced environmental impact.

Suitable for

• Gigabit Ethernet uplinks and access links
• Connecting switches and routers over fiber
• Media converters and fiber patch panels
• Network segments requiring reduced EMI or longer distances than copper

Key specifications

• Interface type: SFP form factor
• Maximum data transfer rate: 1000 Mbit/s (1 Gbit/s)
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Compliance: CE, FCC, RoHS

How to use

Insert the SFP transceiver into a compatible SFP slot on the switch, router or media converter until it seats firmly and the latch engages. Connect the appropriate single-mode or multimode fiber patch cable to the transceiver's optical port, observing correct connector type and polarity for your network. Configure the device port for 1 Gbit/s operation if required by the host equipment. Use hot-swap procedures supported by the host when replacing modules to avoid network disruptions.

Recommendations

Verify compatibility of fiber type, connector type and port settings with your network equipment before installation. Avoid touching optical interfaces; keep protective caps on unused ports to prevent contamination. For best results, adhere to manufacturer guidelines for fiber bend radius and cleaning to maintain link quality.