Μονάδα πομποδέκτη οπτικών ινών BlueOptics JXP-01LGAB1-BO 10000 Mbit/s SFP+

The BlueOptics JXP-01LGAB1-BO is a fiber optic SFP+ transceiver module designed for 10 Gbit/s applications. It supports a maximum data transfer rate of 10000 Mbit/s and uses an SFP+ interface with an LC duplex connector for single-mode fiber links. The compact, silver module weighs approximately 20 g and complies with CE, RoHS and FCC standards. The module implements a 1310 nm transmitter and receiver and is designed for use in network hardware that supports 10GBASE-LR SFP+ optics.

Advantages

The module delivers 10G performance in a compact SFP+ form factor compatible with MSA-compliant ports. It supports long-reach single-mode transmission up to typical 10 km distances when used with appropriate fiber and connectors. The product includes industry-standard optical interfaces and follows common diagnostic and compatibility practices to simplify installation and maintenance. With a lightweight metal housing and standardized electrical/optical interfaces, the transceiver is suitable for space-constrained network equipment.

Suitable for

Key specifications

How to use

Insert the transceiver into a compatible SFP+ port on your switch, router or host adapter until it latches. Connect an LC duplex single-mode patch cable with correct polarity to establish transmit and receive paths. Ensure the remote endpoint uses a compatible 10GBASE-LR SFP+ transceiver or equivalent optical interface. Verify link status and speed via your device management interface and, if available, read digital diagnostic monitoring (DDM/DOM) parameters to confirm optical power, temperature and supply readings. Follow your network equipment vendor instructions for hot-plugging and firmware compatibility.

Recommendations

Use high-quality single-mode fiber and LC duplex patch cords rated for 10G transmission, keep transceiver optical interfaces capped when not in use, and ensure device firmware supports third-party SFP+ modules and DDM/DOM if monitoring is required. For long links, validate link budget and attenuation to confirm reliable operation at the intended distance.