Μονάδα πομποδέκτη οπτικών ινών BlueOptics 3FE25774AA01-BO SFP 10000 m

The BlueOptics 3FE25774AA01-BO SFP 10000 m is a fiber optic transceiver module designed for single-mode links up to 10,000 meters. Housed in an aluminium shell and weighing approximately 20 g, this SFP module provides a compact, industry-standard SFP interface with LC duplex connectivity and supports 1000BASE-LX applications. The module is suitable for integration into network switches, routers and other hardware platforms that accept MSA-compliant SFP transceivers.

Advantages

The BlueOptics transceiver offers compatibility with widely used 1000BASE-LX optical protocols while remaining physically compact and lightweight. Its aluminium housing provides mechanical durability and thermal conduction. The module conforms to MSA SFP mechanical and electrical specifications, enabling plug-and-play replacement in compatible systems. Built for single-mode fiber over long distances, it reduces susceptibility to electromagnetic interference compared with copper links.

Suitable for

• Long-distance Ethernet links up to 10 km over single-mode fiber
• Interconnects between switches, routers and storage systems
• Use in equipment that supports MSA-compliant SFP modules
• Environments requiring lightweight, low-profile transceivers

Key specifications

• Interface type: SFP (MSA-compliant)
• Optical standard: 1000BASE-LX (single-mode fiber)
• Maximum reach: up to 10,000 m (10 km)
• Connector: LC duplex
• Housing material and colour: aluminium
• Weight: about 0.02 kg

How to use

Install the module into an appropriate SFP slot of a compatible network device while the device is powered down or hot-plug according to the device manual. Connect LC duplex single-mode fiber patch cords with correct polarity and verify link status via the host equipment. Configure the network device for 1000BASE-LX operation if required by the platform, and confirm that any required software compatibility or vendor compatibility settings are enabled.

Recommendations

To achieve optimal performance, use high-quality single-mode LC patch cords and ensure proper fiber polarity and connector cleanliness. Verify that the host hardware supports 1000BASE-LX SFP modules and, where applicable, enable Digital Diagnostic Monitoring (DDM/DOM) support in the host to monitor module parameters if supported by the device.