Μονάδα πομποδέκτη οπτικών ινών BlueOptics 31P1338-BO 10000 Mbit/s SFP+

The BlueOptics 31P1338-BO 10000 Mbit/s SFP+ is a fiber optic transceiver module designed for 10 Gbps links in data centre and enterprise networks. With an SFP+ form factor and a compact silver housing, this module supports a maximum data transfer rate of 10000 Mbit/s and offers an MTBF of 1,000,000 hours. It meets CE, FCC and RoHS conformity requirements and is suitable for integration into switches, routers and optical interfaces that accept SFP+ modules.

Advantages

The SFP+ form factor provides a small, hot-pluggable solution for high-speed uplinks and interconnects while conserving slot space in network equipment. A rated transfer speed of 10000 Mbit/s supports common 10 GbE and fiber channel applications. The module's reported MTBF of 1,000,000 hours indicates long operational life under normal conditions. Compliance with CE, FCC and RoHS standards ensures regulatory compatibility and reduced hazardous materials in manufacturing.

Suitable for

• 10 Gigabit Ethernet uplinks and aggregation links
• Server-to-switch and switch-to-switch fiber connections
• Optical interfaces in enterprise, campus and data centre environments

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Form factor: SFP+ small form-factor pluggable
• Housing colour: silver
• Weight: 0.02 kg
• Mean Time Between Failures (MTBF): 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Install the BlueOptics SFP+ transceiver into a compatible SFP+ port on a switch, router or media converter while the host device is powered according to the manufacturer's instructions for hot-pluggable modules. Ensure the module is fully seated and locked. Connect the appropriate fiber optic cable and verify link status on the host device. When removing the module, follow the equipment vendor's procedure to avoid port or module damage.

Recommendations

Use factory-tested single-mode or multimode fiber and compatible connectors as specified by your network design. Verify optical budgets and link distances before deployment and keep firmware and device drivers on host equipment up to date to maintain compatibility with SFP+ transceivers.