Μονάδα πομποδέκτη οπτικών ινών BlueOptics 0C5RNH-BO 10000 Mbit/s SFP+

The BlueOptics 0C5RNH-BO 10000 Mbit/s SFP+ is a fiber optic transceiver module designed for 10 Gigabit Ethernet links. Housed in a compact SFP+ form factor and finished in silver, this transceiver supports a maximum data transfer rate of 10000 Mbit/s and a maximum transfer distance of up to 300 m over multimode or suitable fiber. With a lightweight construction of 20 g and a mean time between failures (MTBF) of 1,000,000 hours, the module is intended for integration into network switches, routers and media converters where a small, hot-pluggable optical interface is required.

Advantages

The transceiver provides a standardized SFP+ interface for easy hot-plug installation and interoperability with compatible equipment. Its support for 10 Gigabit Ethernet ensures high-throughput links while the LC (UPC) fiber connector offers a common industry termination for fiber patching. The silver, compact housing and low weight reduce space and load on equipment panels. Specified MTBF of 1,000,000 hours indicates design reliability appropriate for continuous-network operation.

Suitable for

• High-speed uplinks between switches and routers
• Server-to-switch 10 Gigabit connections
• Fiber runs in data centers and telecom rooms up to 300 m
• Replacement or upgrade of SFP+ optical ports on compatible devices

Key specifications

• Maximum data transfer rate: 10000 Mbit/s
• Maximum transfer distance: 300 m
• Ethernet interface type: 10 Gigabit Ethernet
• Fiber optic connector: LC (UPC)
• Form factor: SFP+
• Weight: 0.02 kg
• Product colour: Silver
• Reliability (MTBF): 1,000,000 hours

How to use

Ensure the transceiver is compatible with the host device and that connected fiber cabling uses LC (UPC) terminations. With the host port powered down if recommended by the equipment manufacturer, insert the SFP+ module into the optical slot until it seats and the latch engages, then connect the LC patch cable. Power up the host device and verify link status via the device interface or indicator LEDs. Follow the host device documentation for any required configuration of link speed, duplex or optical diagnostics.

Recommendations

Use clean LC connectors and proper fiber handling to maintain optical performance; observe manufacturer guidelines for ambient temperature and mechanical insertion/removal. For runs approaching the 300 m limit, confirm fiber type and link budget to ensure reliable operation.