Μονάδα πομποδέκτη δικτύου οπτικών ινών BlueOptics 3883-BO 10000 Mbit/s SFP+

The BlueOptics 3883-BO network transceiver module is a compact fiber optic SFP+ device designed for 10 Gbit/s network links. It supports a maximum data transfer rate of 10000 Mbit/s and fits standard SFP+ ports, providing a small form factor suitable for dense networking environments. The module is finished in silver and has a lightweight construction with a mean time between failures (MTBF) rated at 1,000,000 hours. Compliance with CE, FCC and RoHS standards confirms conformity with common regulatory and environmental requirements.

Advantages

The module delivers high-speed 10 Gbit/s connectivity in an SFP+ form factor that saves space in patch panels and switches. Its long MTBF indicates operational reliability for sustained network use. The lightweight, silver housing and industry-standard interface make it compatible with many network devices that accept SFP+ transceivers. Regulatory compliance reduces integration and certification concerns in commercial and industrial deployments.

Suitable for

• High-speed uplinks between switches and routers
• Data center server-to-switch connections
• Metro and campus fiber connections that require SFP+ modules
• Network equipment upgrades to 10 Gbit/s links

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Form factor: compact SFP+ transceiver
• Mean Time Between Failures (MTBF): 1,000,000 hours
• Colour: silver
• Weight: 0.02 kg
• Standards compliance: CE, FCC, RoHS

How to use

Install the BlueOptics 3883-BO by inserting it into an available SFP+ port on a compatible switch, router or network interface card while the host device is powered down or following the vendor's hot-swap guidance. Connect the appropriate fiber optic cable to the transceiver's connector, ensuring correct connector type and polarity. After physical installation, verify link status and configure the host device's interface settings as required for speed, duplex and any VLAN or network policies.

Recommendations

Use factory-quality single-mode or multi-mode fiber and compatible connectors as specified by your network equipment vendor. Verify compatibility lists for SFP+ transceiver support on your switch or router and ensure firmware is up to date to avoid link negotiation issues. Store unused modules in anti-static packaging and avoid touching optical interfaces to maintain signal quality.