Μονάδα πομποδέκτη δικτύου BlueOptics FN-TRAN-QSFP56-SR4-BO 20000 Mbit/s

The BlueOptics FN-TRAN-QSFP56-SR4-BO is a fiber optic network transceiver module designed for high-speed data transmission. With a QSFP56 interface and a maximum data transfer rate of 20000 Mbit/s, this compact silver module weighs 0.04 kg and is intended for use in networking equipment that accepts QSFP56 form-factor transceivers. The module is engineered for reliable optical connectivity over multimode fiber and specifies a high mean time between failures (MTBF) of 3000000 hours, supporting sustained operation in data center and enterprise environments.

Advantages

The transceiver offers a standardized QSFP56 interface for straightforward integration into compatible switches, routers and storage devices. Its compact design and light weight reduce space and load in high-density racks. The specified MTBF indicates extended operational reliability, while the silver housing ensures consistent physical protection and thermal performance. Compatibility with multimode fiber supports short-reach high-bandwidth links.

Suitable for

Key specifications

How to use

Install the BlueOptics FN-TRAN-QSFP56-SR4-BO by inserting the QSFP56 transceiver into a compatible QSFP56 slot on your network device following the device manufacturer's hot-swap and handling procedures. Connect the MPO/MTP multimode fiber cable to the transceiver's connector, ensuring proper polarity and secure engagement. Configure the host device port parameters (speed, protocol, and diagnostics) according to the network design and verify link status through the device management interface. Observe electrostatic discharge (ESD) precautions and avoid touching optical interfaces; use dust caps when the transceiver is not connected.

Recommendations

Use this module in multimode fiber installations where QSFP56 form-factor high-speed links are supported. Verify compatibility with the specific hardware platform and firmware version before deployment, and select appropriate multimode fiber (OM3/OM4) and MPO/MTP cabling to achieve the intended reach and bandwidth. Periodically inspect connectors for contamination and follow manufacturer guidance for diagnostics and thermal management.